Why might you need to strip the old completion from a story? After some time the development of wax, or other floor completions, will give your hard floor surfaces a dull, cloudy, or yellowed look. Regardless of how hard you spotless and clean you can’t get this yellowing and dimness to leave. The main arrangement is to take off the old floor complete and begin once again.
What’s more, in the event that you have an expansive zone to take a shot at then an auto scrubbing floor machine will help your occupation go a considerable measure speedier. The same floor stripping cushions you use on a revolving floor cradle can likewise be utilized for an auto scrubber. Auto scrubbers, strolls behind or ride-on, can be utilized to vacuum up the stripping arrangement and broke up floor wax in one brisk pass, killing the moderate expulsion with a wet-dry vac and hand squeegee.
There are four essential strides to stripping a story:
1) Apply floor stripper and let it sit on the old completion for momentarily,
2) Scrub and shake the old floor completion to release the completion for simple expulsion
3) Remove the floor stripper and broke down floor wax from the floor, and
4) Rinse and kill the floor before applying another completion.
Floor stripper is essentially concoction arrangements that breaks up and release the old floor wax on your floor. Take after the bearings for your particular floor stripping arrangement (some may require weakening), yet most will oblige you to disperse the arrangement liberally over the floor, yet less that it drenches into breaks and creases. Hold up a couple of minutes (normally 5 to 10 minutes, however take after your particular item bearings) to give the stripper a chance to take a shot at dissolving the old floor wax.
In the wake of holding up a couple of minutes utilize your auto scrubber floor machine, with a dark stripping cushion, to clean the floor. As you disregard the floor with your machine the back end will consequently vacuum up the arrangement and old wax with the implicit squeegees. Utilizing an auto scrubber will spare you a considerable measure of time in this progression of the procedure.
Once your answer and old wax is vacuumed off the floor then flush with clear water. Utilize your auto scrubber to expel this wash water from the floor, as well. A neutralizer arrangement is then expected to kill the solid chemicals of the stripping arrangement so that your new floor completion will satisfactorily hold fast to the perfect floor. In the event that you don’t utilize a neutralizer you risk your new floor wax step by step chipping or peeling off the floor.
Let the floor completely dry before your next stride of applying the new floor wax or wrap up. Floor fans or air movers may be important to accelerate this procedure. At the point when totally dry you’re prepared to apply your new wrap up.
